|
PRESENTING THE NEW ADJUSTABLE M1 BINDING
MARTIN TECHNOLOGIES M1 BINDING
Ever go to do a jump and loose the board?
Ever get hit by a gust and have one foot come
out? Ever launch your kite, walk down to the
water and realize that the last time you went
out your bindings were adjusted for booties?
Now you can get the fit you want when you
want it.
EASE OF USE – The M1 binding is very easy to
use and it’s right for just about everyone.
Because the closure force can be adjusted
minutely and instantly, you can truly dial in the
perfect fit with ease.
3:1 GEAR RATIO - The M1 has a reduction
gear drive that allows you to tighten the
binding very tight (WARNING: This works so
well that you can over tighten your binding and
cut off circulation to your feet. So crank it
down, but don’t over do it).
ON THE FLY ADJUSTMENT – The M1 is the
ONLY binding that can be adjusted easily
while riding and loosened on the water with
ease.
CRANK DOWN FOR ROTATIONAL TRICKS –
When you don’t want your board to come off,
gusty conditions, contests, rotational tricks,
etc – get them tight and you’ll spend a lot less
time working upwind for your board and more
time riding.
LOOSEN FOR BOARD OFF MANUEVERS – The
most common problem, if your bindings are
tight enough to give you the performance you
need, how can you easily get your foot in and
out of the binding when you want to take your
board off? With the M1 you can instantly
release the pressure and re-set your bindings
to any size – making board off tricks a breeze.
QUICK BOARD SWAP, NO STRIPPING OF
HARDWARE – With the M1 you can swap
boards for different riding and wind conditions
without loosing your dialed fit. You can try your
friends’ board, swap with your family
members AND you don’t have to go running
up to the car to find that screwdriver to adjust
the position of the bindings. Often screws are
stripped out from many times of making
adjustments and trying to get your old
bindings to fit right or on different boards. With
the M1 you mount them once and start riding.
PERFECT FOR SCHOOLS AND TRAINING –
Because the M1 bindings are so adjustable,
they are perfect for lessons and schools
where many riders will use the same board,
now you can leave the screwdriver at home.
LIGHTWEIGHT SLEEK DESIGN – At Martin
Technologies we know that weight and size
matters and have designed the M1 to be as
minimal in weight and bulk to give you the
best ride possible and maximize your air time.
Ever get hit by a gust and have one foot come
out? Ever launch your kite, walk down to the
water and realize that the last time you went
out your bindings were adjusted for booties?
Now you can get the fit you want when you
want it.
EASE OF USE – The M1 binding is very easy to
use and it’s right for just about everyone.
Because the closure force can be adjusted
minutely and instantly, you can truly dial in the
perfect fit with ease.
3:1 GEAR RATIO - The M1 has a reduction
gear drive that allows you to tighten the
binding very tight (WARNING: This works so
well that you can over tighten your binding and
cut off circulation to your feet. So crank it
down, but don’t over do it).
ON THE FLY ADJUSTMENT – The M1 is the
ONLY binding that can be adjusted easily
while riding and loosened on the water with
ease.
CRANK DOWN FOR ROTATIONAL TRICKS –
When you don’t want your board to come off,
gusty conditions, contests, rotational tricks,
etc – get them tight and you’ll spend a lot less
time working upwind for your board and more
time riding.
LOOSEN FOR BOARD OFF MANUEVERS – The
most common problem, if your bindings are
tight enough to give you the performance you
need, how can you easily get your foot in and
out of the binding when you want to take your
board off? With the M1 you can instantly
release the pressure and re-set your bindings
to any size – making board off tricks a breeze.
QUICK BOARD SWAP, NO STRIPPING OF
HARDWARE – With the M1 you can swap
boards for different riding and wind conditions
without loosing your dialed fit. You can try your
friends’ board, swap with your family
members AND you don’t have to go running
up to the car to find that screwdriver to adjust
the position of the bindings. Often screws are
stripped out from many times of making
adjustments and trying to get your old
bindings to fit right or on different boards. With
the M1 you mount them once and start riding.
PERFECT FOR SCHOOLS AND TRAINING –
Because the M1 bindings are so adjustable,
they are perfect for lessons and schools
where many riders will use the same board,
now you can leave the screwdriver at home.
LIGHTWEIGHT SLEEK DESIGN – At Martin
Technologies we know that weight and size
matters and have designed the M1 to be as
minimal in weight and bulk to give you the
best ride possible and maximize your air time.
| REG $99.95 NOW $80.00 |
How it works:
The M1 binding is a soft high quality
foot strap that uses a mechanical
advantage gear system and a high
strength cable to fully adjust to any
size and to tighten down for a secure
hold.
The lace cable ends are fixed to a
spool within the Boa Reel. When the
knob is rotated clockwise, the lace is
wound on to the spool as the binding
tightens. The gear train in the reel
develops significant mechanical
advantage so a great deal of
tensioning force is created with very
little effort.
The binding has a smooth sliding
arm that moves in and out of the
binding to provide infinite adjustment.
To release the tension or to increase
the size of the binding, simply pull
directly upwards on the Boa reel to
release. When the binding is in the
position or size for your needs, simply
push the knob back down into its
locking position. If it’s too loose, just
notch the reel clockwise until the
EXACT position you are looking for is
achieved.
The M1 binding is a soft high quality
foot strap that uses a mechanical
advantage gear system and a high
strength cable to fully adjust to any
size and to tighten down for a secure
hold.
The lace cable ends are fixed to a
spool within the Boa Reel. When the
knob is rotated clockwise, the lace is
wound on to the spool as the binding
tightens. The gear train in the reel
develops significant mechanical
advantage so a great deal of
tensioning force is created with very
little effort.
The binding has a smooth sliding
arm that moves in and out of the
binding to provide infinite adjustment.
To release the tension or to increase
the size of the binding, simply pull
directly upwards on the Boa reel to
release. When the binding is in the
position or size for your needs, simply
push the knob back down into its
locking position. If it’s too loose, just
notch the reel clockwise until the
EXACT position you are looking for is
achieved.
| H2air Kiteboarding 1701 Highway 1 Dewey Beach DE 19971 Tel 866-FLY-H2AIR Local 302-227-1105 copyright 1999-2005 h2air kiteboarding | contact | privacy policy | terms and conditions |
DISCONTINUED
